The TriLok ankle support helps prevent lateral ligament ankle sprains

Instructions for Applying the TriLok™

1. Pull on the Brace

Lay the fleece tongue across front of leg and inside brace.

Secure both straps as tight as comfortably possible.

2. Apply the white FootLok™ Strap

Attach the black tab hook fastener found on the narrow end of the FootLok™ Strap "with label up," to the top of the foot and wrap the strap under the foot from the inside to outside. (Diagram a.)

Depress the foot on floor to "expand the foot." Wrap and secure the strap over the black tab on top of the foot and wrap under the foot again. The FootLok™ Strap should be snug around the foot, but not tight. (Diagram b.)

Using the black finger loop, firmly pull the FootLok™ Strap up while rolling the ankle to the inside. Attach FootLok™ Strap to the outside of the ankle. (Diagram c.)

3. Apply the Stirrup Strap

Cross the stirrup straps on top of the foot. Wrap the straps under the foot.

Using the finger pulls, attach each strap to the sides of the ankle, pull up firmly attaching outside first then inside.

4. Roll down Ankle Collar

Roll down the ankle collar over the top of the brace. (Diagram a.)

Pull elastic strap with logo across the front of the brace and attach to opposite side. (Diagram b.)

 

TriLok helps to prevent ankle ligament sprains and injuries.  A great alternative to expensive and timely ankle taping before a game.  The TriLok is very lightweight.